User`s manual

Milestone XProtect Smart Client; User’s Manual
www.milestonesys.com Page 27 Further Configuration
Camera Name
The Camera Name field displays the name of the selected camera. The field is read-only.
Image Quality
The Image Quality setting determines the quality of the images when viewed, but also affects
bandwidth usage.
If the Smart Client is used over the internet, over a slow network connection, or if for other
reasons you need to limit the bandwidth used by the Smart Client, image quality can be reduced
on the server side by selecting e.g. Low or Medium
Tip: You can quickly reduce the bandwidth usage for all cameras in the view by reducing the
image quality for a single camera, then clicking the Apply To All button.
Frame Rate
The Frame Rate setting lets you select a frame rate for the selected camera. Default is Unlimited.
IPIX Split Mode
Available only if the selected camera is an IPIX camera. IPIX is a technology that allows creation
and viewing of 360-degree panoramic images. The Smart Client supports up to four different
viewpoints from a single IPIX camera.
The IPIX Split Mode list lets you select the required spilt mode:
 One by One lets you view a single viewpoint.
 Two by Two lets you view four different viewpoints at a time.
When viewed on the Live and Browse tabs, the IPIX camera will appear as specified, with either
one or four viewpoints from the same image:
Two by Two: Live tab displaying four different viewpoints from a single IPIX camera;
in this example, the IPIX camera's four viewpoints are enlarged for clarity.
Tip: When viewing different viewpoints from an IPIX camera on the Live or Browse tabs, you
are able to navigate each viewpoint independently by clicking inside each viewpoint, or by using
the buttons in the PTZ Control section.