User`s manual

Milestone XProtect Smart Client; User’s Manual
www.milestonesys.com Page 11 Logging In to the Smart Client
 Password: Type your password as specified by your system administrator. The
password is case-sensitive.
5. Click OK.
6. After a short wait, the Smart Client window will open.
The Smart Client window has three tabs: Live, Browse and Setup:
The Live tab is used for viewing live images from cameras, the Browse tab is used for
browsing recorded images from cameras, and the Setup tab is used for configuring the
Smart Client.
Note: Depending on your user rights, you may not be able to access all three tabs.
If You Log In for the First Time
If you have logged in for the first time, you need to determine whether any views exist. Views
determine how images from cameras are displayed in the Smart Client, and are thus required in
order to be able to use the Smart Client.
One or more views may already have been created for you, or you may need to create views
yourself. Read more about views, including how to determine if any views have already been
created for you, in Creating Views on page 12.
Logging in on Different Computers
Your user settings are stored on the surveillance system server. This means that your login can be
used on any computer that has a Smart Client installed.