Installation manual

Chapter 10: Programming the Samsung DCS 2.2/Compact 89
17. If 6 is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press 6.
18. Press UP for the next option.
The display shows:
19. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press #.
20. Press UP for the next option.
The display shows:
21. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press #.
22. Press UP for the next option.
The display shows:
23. If * is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press *.
24. Press the RIGHT softkey TWICE and then press UP to go to the next option.
The display shows:
If the setting is as shown above:
a. Press the RIGHT softkey to move the cursor to the bottom line of the display.
b. Go on to step 25.
If the setting is not as shown above:
a. Press the RIGHT softkey to move the cursor to the line with the setting.
b. Press B.
c. Press A.
d. Go on to step 25.
N
OTE
: A, B, and C are the first three keys in the bottom row of the function
keys.
25. Rotate through the options for PROGRESS TONE ID by pressing UP.
C
ALL TYPE ID
OVERFLOW:#
C
ALL TYPE ID
DID CALL:#
C
ALL TYPE ID
MESSAGE CALL:*
P
ROGRESS TONE ID
DIAL TONE:BA