Installation manual

88 Telephone Switching Systems for Amanda@SOHO
If the setting is as shown above:
a. Press the RIGHT softkey to move the cursor to the bottom line of the display.
b. Go on to step 8.
If the setting is not as shown above:
a. Press the RIGHT softkey to move the cursor to the bottom line of the display.
b. Press *.
c. Go on to step 8.
8. Press UP for the next option.
The display shows:
9. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press #.
10. Press UP for the next option.
The display shows:
11. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press #.
12. Press UP for the next option.
The display shows:
13. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press #.
14. Press UP for the next option.
The display shows:
15. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press #.
16. Press UP for the next option.
The display shows:
C
ALL TYPE ID
ALL FWD CALL:#
C
ALL TYPE ID
BSY FWD CALL:#
C
ALL TYPE ID
NOA FWD CALL:#
C
ALL TYPE ID
RECALL:#
C
ALL TYPE ID
DIR TRK CALL:6