Installation manual

Chapter 10: Programming the Samsung DCS 2.2/Compact 85

When programming MMC: 207, you use the following program keys:

To create a VM/AA port:

1. Press TRSF then dial 207.

The display shows a station number, followed by VMAA PORT and the default value

NORMAL PORT:

2. Do one of the following:

• Dial station number (for example, 209).

• Press UP or DOWN to select a station number. Then press the RIGHT soft key to

move the cursor to NORMAL PORT:

If you picked station 209 (as in the example), the display would show:

3. Do one of the following:

• Dial 1 for VMAA PORT.

• Press UP or DOWN to select VMAA PORT. Then press the RIGHT soft key:

If you picked station 209 (as in the example), the display would show:

Purpose Key

Scroll through a set of options UP and DOWN Arrows

Enter selection Keypad

Move cursor right and left RIGHT and LEFT Softkeys

Move cursor from top to bottom line on

display (or vice versa)

RIGHT and LEFT Softkeys

Store data and advance to next MMC SPK

Clear entry HOLD

Select ALL ANS/RLS

Store and exit TRSF

[209] VMAA PORT

NORMAL PORT

[209] VMAA PORT

ORMAL PORT

[209] VMAA PORT

MAA PORT