Installation manual

Chapter 10:
Programming the Samsung DCS 2.2/
Compact
Getting Started
You can program the Samsung DCS 2.2/Compact from any LCD 12B or 24B keyset.
To begin programming:
1. Press TRSF.
The display shows:
2. Dial 800 as in the following:
The display shows:
3. Dial the passcode. The default passcode is 4321.
The display shows:
4. Press the up arrow once to change from Disable Tenant to Enable Tenant.
The display shows:
5. Press TRSF to redisplay the date and time.
Now you can begin programming. Follow the directions for programming 207 or 726
by dialing 207 or 726.
PROGRAMMING MODE
ENTER PGM ID:
PROGRAMMING MODE
ENTER PGM ID: 800
ENABLE TECH. PROG
PASSCODE:
ENABLE TECH. PROG
DISABLE TENANT: 1
ENABLE TECH. PROG
ENABLE TENANT: 1