Installation manual

Chapter 9: Programming Panasonic DBS 824 79
To program when Night mode starts:
1. Press the FF1 key.
2. Dial 3#1#.
3. Type the time at which Day mode starts using the format HHMM (two digits for the
hour and two digits for the minutes). Also use the 24-hour clock.
For example 8 a.m For example, 8:05
A
.
M
. is 0805 and 8:30
P
.
M
. is 2030.
4. Press the HOLD key.
Programming Each Telephone
To Use Answer Supervision
This feature allows the Panasonic 824 DBS to send an answer signal to third-party voice
mail systems. This provides quicker response time between the Panasonic 824 DBS.
The following programming can be performed from an attendant telephone or any other
telephone that has entered the programming access.
To program answer supervision for voice mail:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Dial #94.
4. Dial 1.
5. Press the HOLD key.
This assigns a 1 as an answer signal to speed up answer detection.
6. Press the ON/OFF key.
7. Repeat steps 1 through 8 on each user’s telephone.
To Use Call Forwarding
Each telephone extension needs to be programmed to use the call forwarding ID code for
voice mail. Do the following procedure on every user’s telephone.
To call forward to voice mail:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the AUTO key.
4. Dial *.