Installation manual

Chapter 9: Programming Panasonic DBS 824 77

OTE

: You may need to be aware what hunt group is associated automatically

with extensions in CPC-S and CPC-M software. In the following proce-

dure, you use the extension that corresponds to the voice mail hunt group.

To program which extensions receive incoming calls during the day:

1. Press the FF4 key.

2. Dial 1#.

3. Dial the extension number (extensions range from 23 to 26 for CPC-S and from 31 to

34 for CPC-M).

Use the extension that corresponds to the voice mail hunt group.

4. Dial #.

5. Dial the trunk number (which ranges from 1 to 6 for CPC-S and from 1 to 8 for

CPC-M).

6. Dial #1#.

7. Press the HOLD key.

8. Repeat steps 1 through 7 for each trunk line.

To program when Day mode starts:

1. Press the FF1 key.

2. Dial 3#25#.

3. Type the time at which Day mode starts using the format HHMM (two digits for the

hour and two digits for the minutes). Also use the 24-hour clock.

For example 8 a.m For example, 8:05

. is 0805 and 8:30

. is 2030.

4. Press the HOLD key.

Using Amanda as a Backup Attendant

To use Amanda as a backup attendant, you must clear the second, third, and fourth

attendant positions.

Do not do the procedures in “Using Amanda as a Primary Auto Attendant” on page 76.

Hunt Group

CPC-S

Extension

CPC-M

Extension

12331

22432

32533

42634