Installation manual

Chapter 8: Programming Panasonic KXTD 1232 67
SELECT (until VM ap-
pears as group setting)
Groupx: VM
-> SEL+ NEXT
Store (the Auto Dial
key)
End (the Hold key) (see
telephone diagrams)
Extension Group Assignment: Place jacks that are
connected to voice mail in their own extension group.
602 EXT Group Asn
SKP+ CLR NEXT
NEXT Jack NO? ->
SKP+ CLR NEXT
NEXT (or jack num-
ber)(01 goes to 01-1)
#01-1:EXG1
-> SEL NEXT
Type group number #01-1:EXGx
-> SEL NEXT
NEXT to #01-2, #02-
1....#32-2 or #64-2
Store
End
Voice Mail Status DTMF Set: Change the discon-
nect signal to #9# and use the default call codes for
the other signals.
113 VM Status Set
SKP+ CLR NEXT
NEXT
(Press 1 if not already
there.)
RBT :1
-> SEL NEXT
NEXT
(Press 2 if not already
there.)
BT :2
-> SEL NEXT
NEXT
(Press 3 if not already
there.)
ROT :3
-> SEL NEXT
NEXT
(Press 4 if not already
there.)
DND :4
-> SEL NEXT
NEXT
(Press 5 if not already
there.)
Answer :5
-> SEL NEXT
NEXT
(Press #9# if not already
there.)
Disconnect :#9#
SKP+ CLR NEXT
NEXT
(Press 9 if not already
there.)
Confirm:9
SKP+ CLR NEXT
Program and Its Purpose What You Enter What You See on Display