Installation manual

60 Installing and Administering Amanda@SOHO
Programming the Hunt Group
The hunt group should be circular.
To program the Intercom Master Hunt Number:
1. Press the LK4 key.
2. Press 14.
This puts you in memory block 4-14, Intercom Master Hunt Number.
3. Go to the Tel Port No. and type the two-digit port number for the first port (for exam-
ple, 25.)
4. Press LK2 to modify the displayed setting to YES.
5. Press the TRF key to enter.
Programming sample:
Tel Port No. Data No. Title Setting Data.
25/ _______14___MSTER__ =YS
To forward calls:
1. Press the LK4 key.
2. Press 15.
This puts you in memory block 4-15, Intercom Master Hunt FWD Assign.
3. Go to the Tel Port No. and type the two-digit port number for the first port (for exam-
ple, 25.)
4. Type the extension that the first port should forward to (for example 301).
Programming sample:
Tel Port No. Data No. Title Setting Data.
25/ _______14___ICMFWD__ 301
5. Press the TRF key.
6. Return to memory block 4-15, by changing the 17 to a 15.
Programming sample:
Tel Port No. Data No. Title Setting Data.
25/ _______14___CLS(1)__ =15
7. Press the CNF key.
8. Enter the next extension to be forwarded to (for example 302).