Installation manual

38 Telephone Switching Systems for Amanda@SOHO
3. Dial one of the following:
1 for 30 sec. 6 for 240 sec.
2 for 60 sec. 7 for 300 sec.
3 for 90 sec. 8 for 360 sec.
4 for 120 sec. 9 for 420 sec.
5 for 180 sec. 0 for 0 sec.
4. Dial * to finish but stay in configuration mode.
Using Unanswered Call Transfer Recall
When a call is transferred to a station and the station does not answer, you will probably
want the call to go into the station’s mailbox. If the call returns to the transferring station
instead of going to voice mail, you need to adjust the Call Transfer Recall time.
To set call transfer recall:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 11 “STA XFR RCL XXX”.
3. Dial one of the following:
1 for 10 sec. 6 for 60 sec.
2 for 20 sec. 7 for 90 sec.
3 for 25 sec. 8 for 120 sec.
4 for 30 sec. 9 for 180 sec.
5 for 45 sec. 0 for 400 sec.
4. Dial * to finish but stay in configuration mode.
Using Private Lines
If you have private lines in your system that need to be answered by the voice mail system,
you must assign a voice mail ID to the private line and program the line to delay ring to
the voice mail system.
The voice mail ID causes the line to go to the right person’s voice mailbox if the line goes
unanswered. For example, if line 3 is a private line for station 14, you want the line to be
answered by the voice mailbox of station 14 if no one is available to answer the line. The
line needs an identification number for this purpose.
To assign a voice mail ID to the private line:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 43 (voice mail line ID).
3. Press the line button (B1 through B6) for the private line. (In the example, you would
have pressed B3 for line 3.)
4. Press # to clear the current ID.