Installation manual

36 Telephone Switching Systems for Amanda@SOHO

• Group 1 = Dial 9 or Dial 0

• Group 2 = Dial 81

• Group 3 = Dial 82

• Group 4 = Dial 83

Assigning line group automatically arranges the system for hybrid operation, which may

incur a higher monthly tariff than the key system operation incurs. Ask the local telephone

company for details.

To program line groups:

1. If you are not already in configuration mode, dial ITCM *#746*.

2. Dial 35 “ASSIGN LINE GRPS”.

3. Dial 1 for Group 1.

4. Select line ports to be assigned by dialing 01 through 06 or B1 through B6. (The port

is assigned if the LED is on.)

5. Dial * to assign lines to another group or ** to finish but stay in configuration mode.

OTE

: To remove lines from a group, enter 0 for the line group.

Setting Prime Line Intercom for Voice Mail Ports

If you assign a group of lines, an intercom line, or one individual line to a particular

station for use as its prime line, the station automatically selects that line for use when the

user takes it off-hook. Single-line telephones must have either line groups or intercom

already programmed.

To program prime line intercom for voice mail ports:

1. If you are not already in configuration mode, dial ITCM *#746*.

2. Dial 53 “STATION FEATURES”.

3. Dial 15 for “PRIME LINE”.

4. Dial 50 for intercom line.

5. Select the voice mail station ports to be assigned by dialing 10 through 25 or A1

through A16. (The station is assigned if the LED is on.)

6. Dial * to assign stations to another prime line or *** to finish but stay in configuration

mode.

Setting Up Message Waiting

Any station that you program with this feature can control the message waiting light at

other stations in the system. When station users see their lights on, they can press ITCM

HOLD to call the station that activated the line.