Installation manual

Chapter 4: Programming the Comdial Unisyn 33
6. Select the station ports to be programmed by dialing the station port number or press-
ing the A1 to A16 buttons.
7. Dial * when all the station ports have been selected.
8. Dial ** to finish but stay in configuration mode.
To program delayed ringing:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 54 “STA/LINE CONFIG”.
3. Dial 2 “DELAY RING”.
4. Select the line ports (1 through 6) for direct ringing by dialing 01 through 06 or press-
ing B1 through B6 (see table above).
5. Dial # when all the line ports have been selected.
6. Select the station ports to be programmed by dialing the station port number or press-
ing the A1 to A16 buttons.
7. Dial * when all the station ports have been selected.
8. Dial ** to finish but stay in configuration mode.
To program night ringing:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 54 “STA/LINE CONFIG”.
3. Dial 3 “NIGHT RING”.
4. Select the line ports (1 through 6) for direct ringing by dialing 01 through 06 or press-
ing B1 through B6 (see table above).
5. Dial # when all the line ports have been selected.
Line
Buttons to
Press
01 B1
02 B2
03 B3
04 B4
05 B5
06 B6