Installation manual

Chapter 14: Programming the WIN 36D 153
14. Press the HOLD key.
The display reads:
CO01:STA=00?
15. Dial the first extension in your hunt group (for example, 18).
The display reads:
CO01:STA=18?
16. Press the CO8 key to save your data and exit program 507.
The display reads:
QUIT
17. Press the HF key to stop programming.
The current date and time appear on the display.
Making Amanda a Backup Attendant
Program 507 defines the type of trunk for each CO line. To use Amanda as a backup
attendant, each CO line must be set to 2: DIL. Then, using programs 505 and 506, you
make extension 10 the DIL station for day and night.
Be sure that extension 10 is set to call forward no answer to the first extension in your hunt
group. For more details about call forward no answer, see “Programming Call
Forwarding” on page 147.
To use Amanda as a backup attendant:
1. Press FEAT + 01# + FEAT + FEAT (to start programming).
The display reads:
PROGRAM NO. ?_
2. Dial 507.
The display reads:
507:DISA TRK SET
3. Press the HOLD key.
The display reads:
CO01:TYPE =1
4. Dial 2.
The display reads:
CO01:TYPE =2
5. Repeat steps 3 and 4 for each CO line you are using.