Installation manual

Chapter 14: Programming the WIN 36D 147
3. Press the HOLD key.
The display reads:
MODE=1
4. Dial 2.
The display reads:
2:NO
5. Press the HOLD key.
The display reads:
MODE=2?
6. Press the CO8 key to save your data and exit program 414.
The display reads:
QUIT
7. Press the HF key to stop programming.
The current date and time appear on the display.
Programming Call Forwarding
The next few programs control forwarding on stations during the day and at night.
Program 303 sets the day call forward busy data for each station. If nothing is
programmed in the night call forward program (304), the day will be in effect both day
and night. Any station may be forwarded to any other station. the default is no forwarding
of any type.
Similarly programs 305 and 306 control call forward no answer for each station. Program
305 is for day and 306 is for night.
To call forward busy by day:
1. Press FEAT + 01# + FEAT + FEAT (to start programming).
The display reads:
PROGRAM NO. ?_
2. Dial 303.
The display reads:
303:D CFWD BUSY
3. Press the HOLD key.
The display reads:
S10:cf TO S00?