Installation manual

Chapter 13: Programming the Vodavi DHS 139
Switching between Day and Night Service
To switch from day to night service or vice versa:
1. Press the Feature button. (FEAT is beneath the HOLD button to the right of the
keypad.)
2. Dial #0.
The display shows:
3. Enter the password (usually 0000)
4. Press the Save softkey.
The display shows:
5. Press the Service (svc) softkey.
The display shows (for example):
6. Press the Change softkey to change from DAY to NITE or NITE to DAY.
7. Press the Clear button (on the telephone).
Notification and Integration Files
For each telephone switching system, Amanda@SOHO stores files with notification, dial
code, and integration information. When you select a telephone switching system,
Amanda knows which files to use for your switch. The files contain:
• The tokens that turn the message waiting light on are in c:\amanda\pbx.db\260.on.
This file contains the tokens “#96-%E”.
• The tokens that turn the message waiting light off are in
c:\amanda\pbx.db\260.off.
This file contains the tokens “#*96-%E”.
• The dial codes and integration strings used by the switch are in
c:\amanda\pbx.db\260.pbx.
This file contains the following lines:
CHK PSWD:_
bksp save chg
SELECT FUNCTION
svc time spd
SERVICE : DAY
back next chg