Installation manual

Chapter 13:
Programming the Vodavi DHS
Creating Ports
When you create stations for the Vodavi DHS, you start with station 10. If, for example,
stations 10 through 15 are for users, you might use 16 (on a two-port system) or 16 and 17
(on a four-port system) as the voice mail ports. (You add a two-port SLT expansion to
create a four-port system.)
To find the number for the second port, you take the number of the first port minus 10 (the
number of the initial port) and then add 58. That means if you punch down 16, you get
ports 16 and 64 (16 - 10 + 58 = 64). If you punch down 16 and 17, you get ports 16, 17, 64,
and 65.
These would end up as members of a hunt group as follows:
Two-port system
member 01:
16
member 02:
64
Four-port system
member 01:
16
member 02:
17
member 03:
64
member 04:
65