Installation manual

116 Telephone Switching Systems for Amanda@SOHO
Setting Up the Ringing
To set up the ringing for the system:
1. From the Database Programming menu, select C.O. Line then press Enter.
The C.O. Line menu appears.
2. Select Ringing Position then press Enter.
The C.O. Line - Ringing Position screen appears
3. Select the C.O. Line number to be programmed for ringing then press Enter to enter
the Day/Night part of the screen.
4. In the Day1 column, you can enter up to six different extension or hunt group pilot
numbers that will ring when the system is in normal Day1 mode. In the Night column,
you can enter one extension or hunt group pilot number. The default to ring Day and
Night is extension 201 only.
Assume that extension 201 is the operator/receptionist for the following examples.