Installation manual

Chapter 11: Programming the Sprint Protegé CTX 97
3. Change the port type for each of the voice mail ports to V.M.
(Page Down until you see the port number. Use the down arrow to move to that port’s
row. Use the right arrow to move to the Port Type field. Press Enter until V.M.
becomes its setting.)
N
OTE
: An analog terminal adapter has two extension numbers: the one that
the adapter is plugged into and the second higher extension that is 72
numbers higher. You can alter extension numbers by swapping them
if you feel it is necessary. Most people do not.
4. Press Escape.
You are asked if you wish to exit this feature every time you exit any section of pro-
gramming.
5. Press Y for yes.
6. When asked to save the current settings, press Y for yes. Press Y again to override the
existing file.
Setting Up Hunt Groups
To set up voice mail and auto attendant hunt groups:
1. From the Database Programming menu, select Extension Applications then press
Enter.
The Extension Application menu appears.
2. Select Uniform Call Distribution then press Enter.
The Uniform Call Distribution menu appears.
3. Select UCD Setting then press Enter.