Installation guide

57
18 Amanda Portal Installation Checklist
1. Physically connect the Amanda PC chassis to the monitor, keyboard, mouse,
network, external modem and power.
2. Power the PC, Monitor, and external modem on.
3. Run configure and select your telephone system type under the PBX tab.
4. Configure at least one port for notify and one port for out-dial.
5. Modify mailbox 997 appropriately adding any additional notification templates,
auto schedules, etc. to the mailbox, then create mailboxes by copying mailbox
997.
6. Setup single digit menus for mailboxes where appropriate under method
information for each mailbox.
7. Record greetings for mailbox 990, 991 for day and night if appropriate.
8. Help end users run through the first time user tutorial to record their
name/extension greeting, change their security code, and record their day and
night greetings.
9. Create auto-schedules for mailbox 990 and 991 and for other mailboxes where
applicable.
10. Help users create mailbox member lists where applicable.
11. Make sure Amanda Portal is logged into the Domain for network (if the network
is peer-to-peer, skip this step).
12. Help users install Amanda Unified Messenger.
13. Create as many CallQ mailboxes as required, and give those mailboxes the create
queue privilege (only if using the call queue module).
14. Customize the CallQ mailboxes (only if using the call queue module).
15. Configure user’s mailboxes who will be using Fax Mail (if applicable)
16. Install Fax32Install on users systems who want to fax out from their desktop
using the Amanda Fax printer driver from the C:\Amanda\Clients folder on the
Amanda Portal PC (fax is only supported when using Intel/Dialogic boards).
17. Activate additional client licenses (if not already activated by production).