Installation guide

49
If you hear the welcome greeting, * to tell Amanda you want to log into a mailbox to
enter user mode. After pressing *, Amanda will prompt you to “enter your mailbox
number”, at this point enter the mailbox number you want to log into. Then Amanda will
prompt you to “enter your security code”. Enter your security code to get logged into the
mailbox.
If you hear the auto login prompt when calling Amanda “enter your security code”, this
means that Amanda has already started the login process for you, by starting the login for
the mailbox matching the extension number you’re calling from. If you wish to log into
that mailbox, enter the security code for the mailbox (the default security code for all user
mailboxes is 997 or whatever the security code is of the mailbox copied to create the
box). If you don’t want to log into the mailbox for that extension, press the # key to
cancel the login and Amanda will send your call to the instructions mailbox where you
can press * to access user mode and enter any mailbox number you wish (for example
990 or 991).
Tech Tip: Mailbox security codes for 990 and 991 are the same as the mailbox number,
new user mailbox default security codes are 997 unless specified otherwise or created by
copying a mailbox other than 997.