Installation guide

37
• Set the Initial Time for the schedule to execute, the time should be set to
the same time as the day schedule
• Set the “Restrict to” days to everyday
• Set the “Execute Every” Years to 1 (for every year) or if this holiday
schedule is NOT annual and needs to be executed only once set Execute
Every to 0 years, 0 months, 0 days, 0 hours, 0 minutes.
• In the method window, click on “Existing Method…”. From the method
list, choose “default_sched” (as shown in figure 47). When choosing
“default_sched” and clicking OK, the method argument wizard will be
launched (as seen in figure 48). Set the value for “grt” to be 3 (or whatever
greeting number was used to play the holiday greeting). No other values
need to be set for this schedule. Click OK to complete the wizard.
• Finally, click on the “save as” button and enter a description for the
schedule, such as “Holiday” as the Unique ID.
You can create as many holiday schedules as you like. Some holidays occur annually on
the same date like Christmas, fourth of July, and New Years, these can be scheduled
yearly (by setting the “Execute Every” years to 1 (every year). Other holidays where the
date changes based on the year must be scheduled each year in advance (this is when it’s
good to set all the values for “Execute Every” to 0 (which means only once) on the
specified date.