Installation guide

Configuration utility “Configure”. You can run Configure from the Amanda Server

program group by clicking

Start => Programs => Amanda Server => Configure.

Figure 41 shows the dial strings used for “light_off” in the configuration utility under the

“PBX Parameters” tab.

Figure 41

In figure 41, the dial strings for “light_off” will dial “#64-%E”. If you need to edit the

value, change the string appropriately (to whatever DTMF needs to be dialed plus %E

which represents the extension number, similar to other Amanda products). Click the set

value button to save the changes. To edit the “light_on” dial string, select the

“dl_light_on” parameter and modify the value appropriately.

7.3 Configuring Amanda to Call a Pager

To configure a mailbox to call a pager, select the mailbox in Amanda Portal Station’s

mailbox list, double click “Notification” to access the notification screen. Once in the

notify screen, do the following:

• In the notify screen, click the “Select” button in the template box.

• In the method list, choose “msg_page”.