Installation guide

11
Figure 15
The example shown in figure 15 has Amanda configured to use the last port for message
notification. Once you’ve chosen the notify port(s) click next to continue.
3.10 Outbound Port Selection
On the Outbound Port Selection page (figure 16), choose one or more ports to be used for
outbound calling (other than notifications). If you chose port 4 in the previous selection,
you can choose port 3 to insure that both ports will be available at the same time or you
can use the same port, or even all ports! By default, the outbound port group is also used
for sending out faxes (Intel/Dialogic only).