Specifications

Specifi cation Sheet
www.amana-ptac.com
6
STC 30 Rating Accessory Kit (not shown)
Raises sound ratings from 27 to 30 to meet or exceed most
sound test requirements.
Accessories
Skirting
Skirting
Leveling Legs
Optional
Fuse Holder
Location
Optional
Power Switch and Circuit Breaker
Location
Power Receptacle
Subbase Box Assembly
14⅛"
42"
16
1
/
16
"
WS900D Standard 14⅛” Depth
WS9**D1 Extra Deep (16” to 24”)
Standard Outdoor Grille
SGK01B Single Pack
Architectural Grille
AGK01*B Single Pack
PGK01*B Single Pack
PTPWHWK4 Hard Wire Kit
PTSB320E 230/208V 15/20A
PTSB330E 230/208V 30A
PTSB420E 265V 15/20A
PTSB430E 265V 25A
PTSB000E Non-electrical
PSHW03A 230/208V
PSHW04A 265V
FHK315C 230/208V 15A
FHK320C 230/208V 20A
FHK330C 230/208V 30A
Model
Heat
Stages
Cool
Stages
Display Type
Shape &
Orientation
C5200609 1* 1 Mech. Manual Round
D9945801 2** 1 Mech. Manual Rect./Horiz.
1246005/6 1* 1 Mech. Manual Rect./V or H
1246001 1* 1 Digital Manual Rect./Horiz.
1246003 2** 1 Digital Manual Rect./Horiz.
1246004 2** 1 Digital Program Rect./Horiz.
1241501 2** 1 Digital Auto Change Rect./Vert.
CBK3**C Circuit Breaker Kit
RTS02 Remote Temperature Sensor
PWHK01C Wire Harness Kit
STC101A 10 Pack
** Depth in inches
Wall Sleeve 14⅛” (D) x 42” (W) x 16
1
/16” (H)
Our insulated, stonewood beige metal sleeves with industry-
standard dimensions are shipped with a weather board for use
during construction. The WS900D is an industry-standard depth
of 14⅛”. The extra-deep sleeves can be custom ordered starting
at 16” to 24” (D) in 1” increments. Sleeves may be shipped
separately to allow for installation during construction.
Outdoor Grilles
Available in stamped-aluminum or architecturally louvered for
application with a WS900D wall sleeve.
AGK—Extruded aluminum architectural grille available with
anodized aluminum fi nish and a baked-on paint fi nish for
durability. Choose from 3 stock colors or a custom color.
CB (Clear Anodized), DB (Dark Brown/Bronze), TB (Stonewood
Beige), WB (White), SB (Special/Custom Colors)
PGK—One-piece injection molded grille using a polymer blend
of engineered thermoplastic high-impact strength material with
chemical resistance and an exterior UV protective coating.
Choose from 3 stock colors. DB (Dark Brown/Bronze), TB
(Stonewood Beige), WB (White)
AGK
or
PGK
Hard Wire Kit (not shown)
Used to permanently wire to the chassis when a stan dard
sub base and power cord are not utilized.
Power Disconnect Switch (not shown)
The PSHW**A power dis con nect switch can be used for
265-volt or 230/208-volt physical dis con nect, where re quired
by local codes. The switch is rat ed at 30-amp ca pac i ty. The
switch is for use with and Amana
®
brand standard sub bases or
PTPWHWK4 Hard Wire Kit.
Subbase Kit
The fully skirted subbase con ceals wiring while pro vid ing
strong support, if needed. Plug-in re cep ta cle and fi eld-wiring
access speeds in stal la tion. Electrical ac ces so ries, such as fuse
holders, circuit breakers and dis con nect switches, meet N.E.C.
re quire ments.
Fuse Holder Kit
Cartridge-style fuses can be installed in the fuse hold er for
use in the subbase or chassis. Avail able in 15, 20 and 30 amp
(included on 265-volt unit).
Thermostats
The following thermostats of fer remote con trol. Any ther mo stat
other than those listed must be submitted to Goodman
Company, L.P., for approval prior to use.
Circuit Breaker Kit (230/208V only)
The circuit breaker kit, available in 15, 20 or 30 amp, can
be used with Amana
®
brand sub bases. It gives over cur rent
protection, and its location al lows you to turn the unit on or off
without tools.
Remote Tem per a ture Sensor
Allows inexpensive, low-voltage temperature sens ing on the
in ter nal wall for more accurate temperature con trol.
Wire Harness Kit (not shown)
For quick connections of the remote thermostat or front desk
with jump ers and connectors.
* PTC Models Only
** PTC and PTH Models
Subbase Extension Cover Kit
Converts older 30-amp subbases to allow for installation of the
larger 30-amp LCDI power cord and plugs.
SBEC10A 10 Pack