Specifications

www.amana-ptac.com
Specifi cation Sheet
PTAC
Packaged Terminal Air
Conditioner and Heat Pump
No other unit in the industry offers so many extras
already built in as standard on every unit. Don’t
settle for anything less than the Amana
®
brand
Standard Ad van tage!
U
R
L
C
U
R
L
FULL WARRANTY
• 1st Year
• 2nd- through 5th-Year—Sealed System
LIMITED WARRANTY
• 2nd- through 5th-Year—Parts
Added Great Standard Features
More Effi cient
Quieter
Easier to Clean
Longer Lasting
NEW Bent Coil Design. Our unique new bent condenser coil
maximizes airfl ow through the 25%-increased primary and
secondary coil surfaces, which further cools the refrigerant and
maximizes the sealed system life. The bent coil design also allows
us to maximize the fan slinger ring by adding side surface for the
condensate to be evaporated, reducing condensate over-fl ow.
Our bent coil technology raises the bar on America’s best PTAC
to a new level of excellence. Why bend the coil? Quite simply,
to get the maximum primary coil surface area possible into an
industry standard-sized wall sleeve. More primary coil surface
means more effi cient heat transfer, lower system operating
temperatures, longer compressor life, better condensate
dispersion and sustainable high effi ciencies.
NEW Quieter Operation. Our new PTAC has been redesigned
to be the quietest PTAC we’ve ever built! The new 9-bladed
condenser fan, additional copper refrigerant tubing, increased
copper tubing spacing, relocation of the reversing valve on
heat pumps, as well as other product enhancements, all equate
to a more reliable and much quieter operating unit.
NEW Forward-curved 9-Blade Fan. The new 9-blade, forward
curved, polypropylene condenser fan has been designed to
move more air more effi ciently and with much less operating
sound than fans with fewer blades. The result is a more effi cient
unit that will last longer and operate quietly.
NEW Removable Top Condenser Shroud. The removable top
of the new bent coil condenser shroud allows easy access to
clean the condenser coil and maintain the unit’s effi ciency and
capacity. The removable top reduces cleaning time and cost. A
clean condenser coil extends compressor life.
NEW Pullout Filter Design. Our new 1-piece pullout fi lter design
allows easy access to clean or replace the fi lter. Just open
the front louver and pull out the fi lter. The universal fi lter design
allows for foolproof installation. The slide-out design also allows
for many optional approved fi lter media to be used, such as our
Activated Charcoal Filter Kit (CFK01B).
NEW Electronic Temperature Limiting. The new “B” series PTAC
has an enhanced electronic temperature limiter that allows you
to easily select any of the 4 pre-programmed room temperature
ranges by simply fl ipping an easily accessible set of switches.
Save energy and money by avoiding the extreme temperature
settings that can occur with guest operation.
NEW Deep Base Pan & Sub-cooler. The extra-deep base pan
holds additional condensate water and allows more of the coil
surface to be immersed in condensate water, which further
cools the refrigerant and maximizes heat transfer. The new
sub-cooler design is also in the deepened base pan and adds
additional heat transfer. The result is higher effi ciency and a
cooler sealed system, which equates to longer life.
NEW Stonewood Room Front. Our new Stonewood room front
strikes the balance between attractive styling and practical
design. Distinctive contours and a modern appearance
enhance the character of even the most luxurious room, while
the sleek 7⅜” depth—one of the shallowest in the industry—
maximizes usable space for your guests.
NEW WS900D Wall Sleeve. The new Stonewood wall sleeve has
been designed using a technique to dramatically strengthen
and make the sleeve more rigid. The sleeve’s base pan has also
been enhanced by now being made of drawn steel, so the
sleeve has no corner seams that can break and potentially leak
if improperly installed. (This item purchased separately.)