Product specifications

SS-PTAC50 www.amana-ptac.com 9
SPECIFICATION SHEET
DIGISMART™ ACCESSORIES
DD01A — DIGIDOOR: WIRELESS RF OCCUPANCY SENSOR
The DigiDoor is a combination door switch and room motion sensor powered by 2 AAA batteries that are included in the kit.
Once wirelessly linked to an Amana
®
brand DigiSmart™ PTAC, the DigiDoor monitors room occupancy and automatically activates the Energy Management
System (EMS) temperature set-back function.
You can further refi ne your EMS programming by confi guring the DigiSmart with up to 100,000 EMS set-back combinations, either through the DigiSmart
touch-pad or wirelessly through the optional DigiTenna DT01A and DP01A Gateway.
The DigiTenna (DT01A) is required for the DigiDoor to communicate to the DigiSmart PTAC
DP01A — DIGIPLATFORM: WEB-ENABLED PLATFORM CONTROLLER
The DigiPlatform uses standard 115-volt power and communicates by antennae to each Amana
®
brand DigiSmart ™ PTAC with a DigiTenna (DT01A) on an
encrypted 2.4 GHz signal using the 802.15 Zigbee standard.
All DigiSmart™ suite of peripherals linked to a DigiSmart™ PTAC can be monitored, controlled, and upgraded easily through the DigiPlatform wireless RF
network.
Because it is Web-enabled, all DigiPlatform functions can be accessed through the Amana
®
brand Hotel Link software contained in the DigiPlatform.
The DigiPlatform has several other software applications embedded in the device that allow optional connectivity to a property management system to
monitor room rental status. Optional drivers and/or software are required.
Being BACnet- and LAN-compliant allows the DigiPlatform to integrate with almost every property controller available in the industry today. The DigiPlat-
form allows operational monitoring of each PTAC and peripheral device. Additional optional software may be required.
DigiPlatform can use a 120-volt or 240-volt power source; may require a power cord.
DS01A — DIGISTAT” RF WIRELESS REMOTE-MOUNTED THERMOSTAT
The DigiStat is a remote wall-mounted thermostat that can control the Amana
®
brand DigiSmart™ PTAC from anywhere in the room. It is powered by 2 AAA
batteries that are included in the kit.
The DigiStat communicates on a two-way RF encrypted signal. Settings can be changed either at the DigiStat or on the PTAC at the DigiSmart touch-pad.
Settings are automatically relayed to the other device within moments.
A DigiTenna (DT01A) is required for the DigiStat to communicate with the DigiSmart PTAC.
DSUK01B — DIGISMART CONTROL BOARD UPGRADE KIT
Any Amana
®
brand Series A or Series B PTAC produced since 1996 can be upgraded with a DigiSmart™ control board.
The DSUK01B is a fi eld-installation kit to convert an older ‘knob control’ Amana
®
brand PTAC to the new DigiSmart™ LED control.
The converted Amana
®
brand PTAC has the same energy management system as a DigiSmart™ PTAC and can connect to the DigiSmart™ suite of peripheral
devices.
DT01A — DIGITENNA: WIRELESS RF GATEWAY TRANSCEIVER ANTENNA
The DigiTenna mounts inside the Amana
®
brand DigiSmart PTAC, hidden from sight. It is powered through PTAC and requires no
batteries. It is required for any of the DigiSuite RF wireless devices to communicate with the Amana
®
brand DigiSmart PTAC.
The DigiTenna communicates to any of the Amana DigiSmart suite of devices via an encrypted 2.4 Ghz signal using the 802.15 Zigbee standard. Some
Amana
®
brand DigiSmart PTACs may require upgrades to the latest DigiSmart software to allow RF devices to be linked to the control.
For use with: DD01A and DS01A, both required parts of package
REMOTE ENERGY MANAGEMENT SYSTEMS (EMS) READY
An 18-pin low-voltage connector links the unit to many wired energy management systems (EMS). The control board has low-voltage terminals for a wired
room motion sensor, a door switch, or a remote-mounted thermostat. Two serial communication ports also allow for future communications capability to
many other types of Amana-approved wireless RF peripheral devices.
REMOTE THERMOSTAT READY
The unit has an 18-pin connector with seven dedicated low-voltage terminals for easy connection to a wide variety of remote wired thermostats. The unit’s
off-board 20-va transformer has enough power to supply energy to most commercially available thermostats. Also, the unit can be confi gured to be used
with either a “B” or an “O” terminal, further increasing the types of thermostats that can be connected to the unit.