Product specifications
SS-PTAC50 www.amana-ptac.com 9/07
Supersedes 3/07
PRODUCT SPECIFICATIONS
PTAC
PACKAGED TERMINAL AIR CONDITIONER
AND
HEAT PUMP
Our new PTAC is the quietest PTAC we’ve ever built! No
other unit in the industry offers so many extras already
built in as standard on every unit. Don’t settle for anything
less than the Amana® brand Standard Ad van tage!
Features
Bent Coil Design maximizes airfl ow through the 25%-increased
primary and secondary coil surfaces, further cooling the
refrigerant and maximizing the sealed system life. This design
also maximizes the fan slinger ring, adding side surface for
condensate evaporation and reduced condensate overfl ow.
Forward-curved 9-Blade Condenser Fan moves more air more
effi ciently and with much less operating sound than fans
with fewer blades.
Removable Top Condenser Shroud allows easy access to clean
condenser coil and maintains the unit’s effi ciency and
capacity.
Pull-out Filter Design allows easy access to clean or replace the
fi lter. The slide-out design also allows you to use many
optional approved fi lter media, such as our Activated Charcoal
Filter Kit (CFK01B).
Electronic Temperature Limiter in the DigiSmart™ PTAC allows you
to effortlessly select any of the four pre-programmed room
temperature ranges by simply fl ipping an easily accessible set
of switches. Save energy and money by avoiding the extreme
temperature settings that can occur with guest operation.
Deep Base Pan & Sub-cooler holds additional condensate water and
allows more of the coil surface to be immersed in condensate
water, which further cools the refrigerant and maximizes heat
transfer. The new sub-cooler design is in the deepened base
pan and adds additional heat transfer.
NEW Stonewood Room Front offers distinctive contours and a
modern appearance to enhance the character of even the
most luxurious room, while the sleek 7” depth — one of
the shallowest in the industry — maximizes usable space for
your guests.
NEW Stonewood Wall Sleeve has been dramatically strengthened for
more rigidity. The sleeve’s base pan is now made of drawn
steel, so the sleeve has no breakable corner seams that can
potentially leak if improperly installed. (This item purchased
separately.)
•
•
•
•
•
•
•
•
50 HZ
240/200 VOLT