Product specifications

ManualsBrandsAmana ManualsAir ConditionerDigiSmart PTC models

SS-DPTAC www.amana-ptac.com 5/06

Supersedes 4/06

PRODUCT SPECIFICATIONS

DIGISMART

™

PTAC

PACKAGED TERMINAL AIR

ONDITIONER AND HEAT PUMP

FULL WARRANTY

• 1ST YEAR

• 2ND THROUGH 5TH YEAR — SEALED SYSTEM

LIMITED WARRANTY

• 2ND THROUGH 5TH YEAR — PARTS

WITH

IGI

MART

™ C

ONTROL

OARD

We have designed the Amana

brand Packaged

Terminal Air Conditioner for customer comfort

and owner piece of mind. No other unit in the

industry offers so many energy management

features as standard. With the ability of the

DigiSmart™ PTAC to reduce operating costs by

35%, there is no need to settle for anything less

than an Amana

brand PTAC.

Features

Energy Efﬁ ciency — Amana

brand PTACs have

an EER of up to 12.8 (on heat pumps, a COP

of up to 3.6) to keep energy consumption to a

minimum

On-board Energy Management System —

Amana

brand units are equipped with EMS

technology to better control room temperature

and save energy dollars

DigiSmart™ Control Board — ready for wireless

or wired operation

Programmable Set-back Program — owner-

controlled settings allows automatic

temperature setback when unit is idle

Network Ready — Amana

brand DigiSmart™

units connected to a Tridium JACE controller

automatically build their own wireless network

DigiSmart™ Suite of Peripherals — remote

occupancy sensor, remote thermostat,

RF antennas, and RF platform controller

provide everything you need to reduce energy

costs by 35%

•

Summary of content (16 pages)

PAGE 1
DIGISMART™ PTAC PACKAGED TERMINAL AIR CONDITIONER AND HEAT PUMP PRODUCT SPECIFICATIONS We have designed the Amana® brand Packaged Terminal Air Conditioner for customer comfort and owner piece of mind. No other unit in the industry offers so many energy management features as standard. With the ability of the DigiSmart™ PTAC to reduce operating costs by 35%, there is no need to settle for anything less than an Amana® brand PTAC.
PAGE 2
SPECIFICATION SHEET FEATURES DIGISMART™ The Amana® DigiSmart™ suite of products work together to let you control and monitor each air conditioning unit. In-Room Products • PTAC — The PTAC itself contains all the processing power and software to manage energy consumption, unit status, and comfort performance. • Occupancy Control — The remote sensor above the door determines if the room is occupied or not.
PAGE 3
SPECIFICATION SHEET EMS ACCESSORIES DD01A — DIGIDOOR: WIRELESS RF OCCUPANCY SENSOR The DigiDoor is a combination door switch and room motion sensor powered by 2 AAA batteries that are included in the kit. Once wirelessly linked to an Amana® brand DigiSmart™ PTAC, the DigiDoor monitors room occupancy and automatically activates the Energy Management System (EMS) temperature set-back function.
PAGE 4
SPECIFICATION SHEET PTAC ACCESSORIES WALL SLEEVE 14⅛” 42” (W) X 161/16” (H) WS900D Standard Our insulated, Stonewood Beige metal sleeves with 14⅛” Depth industry-standard dimensions are shipped with a weather WS9**D1 Extra Deep board for use during construction. The WS900D is an (16” to 24”) industry-standard depth of 14⅛”. The extra-deep sleeves can be custom-ordered starting at 16” to 24” (D) in 1” ** Depth in inches increments.
PAGE 5
SPECIFICATION SHEET PTAC ACCESSORIES (CONT.) SUB-BASE KIT The fully skirted sub-base conceals wiring while providing strong support, if needed. Plug-in receptacle and fieldwiring access speeds installation. Electrical accessories, such as fuse holders, circuit breakers, and disconnect switches meet NEC requirements. HARD-WIRE KIT (NOT SHOWN) Used to permanently wire to the chassis when a standard sub-base and power cord are not used.
PAGE 6
SPECIFICATION SHEET PTAC ACCESSORIES (CONT.) STC 30-RATING ACCESSORY KIT (NOT SHOWN) Raises sound ratings from 27 to 30 to meet or exceed most sound test requirements. STC101A 10 Pack Rated Watts HEATER KIT—FOR HEATER-LESS UNITS ONLY (NOT SHOWN) Optional 1.5 kW heater kits are available for use only with models originally shipped without electric heat. Ask salesperson for details. Model Nominal BTUs All Full Load Amps (incl. fan) Min.
PAGE 7
SPECIFICATION SHEET PTAC ACCESSORIES (CONT.) HYDRONIC VALVES (NOT SHOWN) Water and steam valves are available for use with the HWK03 (water) and HVK03 (steam) heat kits. (See Architects and Engineers Manual for specifications.) HYDRONIC TRANSFORMER RELAY KIT (NOT SHOWN) Add-on kit that allows field conversion of a standard PTC unit to a hydronic unit.
PAGE 8
SPECIFICATION SHEET PRODUCT SPECIFICATIONS PTC MODELS — COOLING/ELECTRIC HEAT Model 1, 7, 9, 10, 12 PTC073B**A- PTC074B**A- PTC093B**AM PTC094B**AM PTC123B**AM PTC124B**AM PTC153B**AM PTC154B**AM 230/208 265 230/208 265 230/208 265 230/208 265 M Models M= 7,100/6,900 M = 7,100 9,100/8,900 9,100 12,000/11,900 12,000 14,000/13,900 14,000 N Models N= 7,400/7,300 N = 7,300 N/A N/A N/A N/A N/A N/A Amps 12 2.8/3.0 2.3 3.7/3.8 3.0 4.6/5.0 4.3 6.3/6.9 5.
PAGE 9
SPECIFICATION SHEET PRODUCT SPECIFICATIONS (CONT.) PTC AND PTH MODELS — ELECTRIC HEAT PERFORMANCE (Primary Heating for PTC Models; Auxiliary Heating for PTH Models; See below for Power Cord Configuration) Electric No. of Heater Size (kW) Stages Voltage Nominal Heating (BTU/h) @ 230V @ 208V @ 265V Total Watts6 Total Amps8 Minimum Circuit Ampacity2 MOD4 (amps) Power Cord 230/208V 2.5/2.0 1 8,500 6,800 -- 2,650/2,140 11.5/10.2 14.2 15 6 - 15 P 230/208V 3.5/2.
PAGE 10
SPECIFICATION SHEET PRODUCT SPECIFICATIONS (CONT.) PTH MODELS — COOLING/HEAT PUMP/ELECTRIC HEAT Model PTH073B**A- 1, 7, 9, 10, 12 Voltage PTH074B**A- PTH093B**AM PTH094B**AM PTH123B**AM PTH124B**AM PTH153B**AM PTH154B**AM 230/208 265 230/208 265 230/208 265 230/208 265 M Models M=7,000/6,800 M=7,000 9,100/ 8,900 9,100 12,000/ 11,800 12,000 14,000/ 13,900 14,000 N Models N=7,400/7,300 N=7,300 N/A N/A N/A N/A N/A N/A Amps12 2.8/3.0 2.3 3.5/3.8 3.0 4.6/5.0 4.3 6.3/6.
PAGE 11
SPECIFICATION SHEET PRODUCT SPECIFICATIONS (CONT.) PTH MODELS — REVERSE-CYCLE HEATING PERFORMANCE Heating Capacity1 BTU/h5 PTH073B**A- PTH074B**A- PTH093B**AM PTH094B**AM PTH123B**AM PTH124B**AM PTH153B**AM PTH154B**AM M Models M=6,200/6,000 M = 6,200 8,200/8,000 8,200 10,800/10,600 10,800 13,300/13,200 13,300 N Models N=6,400/6,300 N = 6,200 N/A N/A N/A N/A N/A N/A Amps12 2.6/3.0 2.2 3.2/3.6 2.6 4.5/5.1 3.9 5.7/6.3 5.
PAGE 12
SPECIFICATION SHEET CONTRACT BID SPECIFICATIONS Ratings Each unit must meet the following specifications: ARI rating of _________BTU/h cooling (and _________ BTU/h reverse cycle heating with a COP of _________ at 47° F O.D.) Electric resistance heat of _________ BTU/h. Total Amp draw must be of _________ and _________ Watts at _________ volts. The unit must remove a minimum of _________ pints of moisture per hour when operated at rating conditions. The EER must be a minimum of _________ EER.
PAGE 13
SPECIFICATION SHEET NEW INSTALLATIONS TYPICALLY REQUIRE A MINIMUM OF AND AN OUTDOOR GRILLE. Wall Sleeves (WS900D) The wall sleeve must be industry-accepted dimensions: 14⅛” depth x 42” width x 161/16” height and constructed of G90 HDG galvanized steel with a baked corrosioninhibiting urethane primer and baked-polyester topcoat enamel. Sleeve must be insulated and shipped with a weather resistant rear closure panel installed.
PAGE 14
SPECIFICATION SHEET INSTALLATION: UNIT WITH ACCESSORY WALL SLEEVE AND SUB-BASE ACCESSORY 42" TOP VIEW 40" 6 - 1 / 8" 9 - 9 / 16" 24 - 5 / 16" 1" Location of external drain holes on bottom flange of Wall Sleeve Air Flow 1" Air Flow Air Flow Control Door Air Discharge Grille 3 AIR DISCHARGE GRILLE IS REVERSIBLE TO PROVIDE EITHER 15° OR 40° DISCHARGE ANGLE 3" Clearance to side walls " 7/8" STAMPED GRILLE 21-1/2" RIGHT VIEW 1-3/8" ARCH GRILLE 14-1/8" WALL SLEEVE 7-3/8" 15° 40° 16-1/
PAGE 15
SPECIFICATION SHEET FRAMING FOR ACCESSORY WALL SLEEVE (WS900D) Alternative Fastening Method (Field Supplied) FASTENING WALL SLEEVE Wood Screw Toggle Bolt Expansion Anchor Bolt Mounting Holes (Drilled by Installer) Plastic Anchor When installed in an opening, the Wall Sleeve must be horizontally level (side-to-side) and pitched ¼ bubble to the outside. (NOTE: To ensure unit’s maximum efficiency, DO NOT over- or under-pitch.
PAGE 16
SPECIFICATION SHEET NOMENCLATURE P T C 0 9 3 A 3 5 A M Major Design Series Package Terminal Heater Sizes 00 = 0.0 kW 35 = 3.5 kW (230/208v) 15 = 1.5 kW 3.7 kW (265v) 25 = 2.5 kW 50 = 5.