Technical information

Disassembly Procedures
To avoid the risk of electrical shock, personal injury, or death, disconnect power to oven and discharge the
capacitors before following any disassembly procedures.
Control Panel Removal
1. Disconnect power to oven and remove outer case.
2. Disconnect and label wires from controller/timer.
3. Open oven door.
4. Remove screw securing top of control panel to cavity. Lift control panel up and out to release tabs.
Disconnecting Wire Terminals
All wire terminals are locking-type terminals.
Proceed as follows to disconnect wire terminals:
Insulated terminals:
Grasp insulator pod and pull back. DO NOT PULL ON WIRE.
1Grasp
Wire
Insulator
Pod
2
Pull
Non-insulated terminals:
Use a small blade screwdriver to depress locking-tab and pull on terminal. DO NOT PULL ON WIRE.
1
Release
locking-tab
Wire
2Pull