Technical information

Disassembly Procedures
To avoid the risk of electrical shock, personal injury, or death, disconnect power to oven and discharge the
capacitors before following any disassembly procedures.
Door Removal
1. Disconnect power to oven.
2. Open oven door, remove top hinge cap, and slowly lift door to disengage the hinge pins at top and bottom.
Top hinge cap
Top
hinge
cap
3. To reinstall door, place top pin into slot first, then align bottom pin.
4. Reinstall top hinge cap.
Outer
Door
panel
Door frame/
choke assembly
Choke
cover
Latch
assembly
Spring
Door
Handle
* Tighten side screw first and apply Loctite