Manual

Safety
!i! PRECAUTIONSTOAVOID
POSSIBLEEXPOSURETO
EXCESSIVEMICROWAVE
ENERGY:
(a) Do not attempt to operate this oven withthe door open
since open-door operation can result in harmful exposure to
microwave energy. It is important not to defeat or tamper
with the safety interlocks.
(b) Do not place any object between the front face of the oven
and the door or allow soil or cleaner residue to accumulate
on sealing surfaces.
(c) Do not operate the oven if it is damaged. It is particularly
important that the oven door close properly and that there is
no damage to the
1) Door (bent or dented),
2) Hinges and latches (broken or loosened),
3) Door seals and sealing surfaces.
(d) The oven should not be adjusted or repaired by anyone
except properly qualified service personnel.
WARNING
Always observe Safety Precautions when using your
oven. Never try to repair the oven on your own - there
is dangerous voltage inside. If the oven needs to be
repaired, call 1-800-843-0304 U. S. A, 1-800-807-6777
CANADA for the name of an authorized service
center near you.
IMPORTANT SAFETY INSTRUCTIONS
When using any electrical appliance, basic safety precautions
should be followed, including the following:
WARNING
To reduce risk of burns, electric shock, fire, personal
° injury or exposure to excessive microwave energy:
• Read all safety instructions before usingthe appliance.
• Read and followthe specific"PRECAUTIONS TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" on this page.
• This appliance must be grounded. Connect onlyto properly grounded
outlets. See "IMPORTANT GROUNDING INSTRUCTIONS" on page
3 of this manual.
• Install or place this appliance only in accordance with the installation
instructions provided.
,, • Some items, like whole eggs and food in sealed containers, may
explode if heated in this oven.
• Use this appliance onlyfor its intended use as described inthe
manual. Do not use corrosive chemicals or vapors inthis appliance.
This type ofoven is specifically designed to heat, cook, or dry food. It
is not designed for industrial or laboratory use.
SAVE THESE INSTRUCTIONS