Use and Care Manual

98
POWER FAILURE
1
2
3
6
8
7
5
4
AMAW18S/AMAW16S2MS
When a power failure occurs, the wine cooler can normally store for several wine
hours. Do not put additional into thwine e appliance during a power failure, and do
not open door. Disconnect the plug from the outlet, and reconnect when the
power has been restored.
VACATION AND MOVING CARE
3. Clean the wine cooler. See Cleaning on page 7.
If you choose to turn the wine cooler off before you leave, follow
these steps.
1. Remove all open wine bottles from the wine cooler.
2. Unplug the wine cooler.
When you are moving your wine cooler to a new home, follow
these steps to prepare it for the move.
1. Remove all wine bottles from the wine cooler.
2. Unplug the wine cooler.
3. Clean, wipe and dry it thoroughly. See Cleaning on page 7.
4. Take out all removable parts, wrap them well, and tape them
together so they do not shift and rattle during the move.
5. Tape the doors shut and tape the power cord to the wine
cooler.
When you get to your new home, put everything back and refer to
the Installation Instructions on page 3 for preparation instructions.
1. Top hinge cover
2. Top hinge screw
3. Top hinge
4. Cabinet plug
5. Bottom hinge
6. Door handle plug
7. Bottom hinge screw
8. Leveling legs
Do not tilt the appliance
over 45° when revising
the door as possible
damage to the sealed
system may occur.