Use & care guide

8
Assemble side burner valve assembly
Using a Phillips screwdriver, remove the 2 screws from the 1.
side burner valve assembly. Set aside the screws.
Push the valve stem out through the opening in the front of 2.
the side burner shelf, lining up the threaded holes in the side
burner valve assembly with the openings on the side burner
shelf.
Position the side burner bezel (C) into place with the OFF 3.
position facing up, making sure to align the holes.
Attach the side burner bezel to side burner assembly face 4.
with screws (B) removed in Step 2.
Press knob (A) onto valve assembly stem with OFF position 5.
facing up.
Insert cast burner assembly (A) from the top hole of the side 6.
burner assembly. Make sure the tip of the side burner valve
assembly (B) ts into the cast burner assembly (A).
Attach the cast burner assembly (A) with a nut (C). Then 7.
secure the holding bracket (D) with two (2) M4 screws (E).
Screw igniter to the side burner.8.
Connect two (2) igniter wires from the grill to the open termi-9.
nal of the igniter.
Connect the ex line in the manifold to the side burner valve.10.
NOTE: Insert the round end wire into the round terminal of
the igniter and insert the other wire in to the middle terminal.
Complete grill assembly
Place the side burner grate onto the side burner tray. Position 11.
the 3 longer legs of the grate into the holes around the side
burner.
Install the drip pan bracket into the opening in the grill head 12.
bottom and insert the drip pan.
A
B
A. Drip pan holder
B. Drip pan
Insert the avor grids into the cutouts with triangle ridges 13.
facing up.
Install main cooking grates on the ledges provided on the grill 14.
to create the cooking surface.
Slide the warming shelf through the cutouts on the hood 15.
support and onto the 2 brackets.
A
B
C
A
B
A. Cast burner assembly
B. Side burner valve assembly
C. Nut
D. Holding Bracket
E M4 Screws
A
B
A
C
E
D
A. Igniter
B. Igniter wires
A. Side burner knob
B. Side burner bezel
A. Side Burner Grate
A
B
Assemble side buner casting assembly
1.
2.
4.
3.
5.
3.
5.
1.
2.
4.