Use & care guide
6
9 - Self-tapping screws ■
8 - M5 x 10 Phillips pan head screws ■
8 - M5 x 40 Phillips pan head screws ■
4 - M6 x 65 Phillips pan head screws ■
1 - Side burner knob with bezel ■
NOTE: Other hardware required is attached to the grill where
needed.
A. Control knob: main burners
B. Side shelf
C. Grilling/cooking surface
D. Roll top grill hood
E. Hood handle
F.
Bread Warming Rack
G. Side burner
H. Control knob: side burner
I. Electronic igniter: main
burners and side burner
J. Grill Cart
Assembly Hardware Supplied (actual size)
The LP gas fuel tank barrier is attached to the cart base. 1.
Turn the LP gas fuel tank barrier 90 degrees as shown (A).
Bend the LP gas fuel tank barrier into a “V” shape (B).2.
Use (1) self-tapping screw to install the LP gas fuel tank 3.
barrier onto cart base
Use (2) self-tapping screws to install the LP gas fuel tank 4.
holder onto the cart base.
Insert the end of LP gas fuel tank retention bar through the 5.
holes of the cat base as shown.
Tools Needed
# 2 Phillips screwdriver ■
Adjustable wrench ■
1/2” wrench or socket ■
1/4” nut driver or socket ■
Tape measure ■
Level ■
Noncorrosive leak detection ■
solution
Parts Supplied
Gas pressure regulator/hose assembly set for 11” WCP LP gas ■
(attached to manifold).
Parts Needed
20 lb LP gas fuel tank ■
A. LP gas fuel tank barrier
B. Self-tapping screw
A. LP gas fuel tank retention bar
B. LP Gas fuel tank holder
Assembled Grill View
ASSEMBLY INSTRUCTIONS
Assemble cart base
A
B
C
D
E
F
G
H
I
J