User’s Manual Intelligent Recognition Terminal/Intelligent Recognition System AMIR201H, AMIR201S, AMIR202F FCC ID: 2AV9Y-AMIR201H AM Incorporation for Metrology and Testing Technology Services
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Product Introduction AM Quick Test Infrared Thermometer Model: AMIR202F 2
Features ◼ With offline face recognition technology, the recognition rate can reach 99.7%, and the offline face database is up to 20,000; ◼ Support auto door opening ways of face recognition, visual intercom, APP teleoperation, card, password and other ways; Support face recognition and temperature detection with mask; ◼ 1: N mode live identification, which prevents photo and video attacks; ◼ High recognition accuracy: error rate is 1/10000, passing rate is 99.
Product Parameters Model：AMIR202F Camera Screen Processor 4 Resolution 200W Pixels Type Dual-Camera with Wide Dynamic limits Aperture F1.8 Focus 50-150cm White Balance Auto Fill Light Led and Infrared Double Fill Light Size 8.0 inch IPS LCD Screen Resolution 1280 X 800 CPU RK3288 Quad-Core (RK3399 Optional) Memory EMMC 8g Network Module Supports Ethernet, Wireless (WIFI) Audio Support 2.
Product Parameters Model：AMIR202F I/O Interface Features USB Interface USB2.0 Interface: 2; OTG Interface: 1 Serial Communication Interface Rs232 Serial Port, 485 Relay Outputs 2.5mm Terminal 2p Wigan Interface 2.
Product Parameters Model：AMIR202F Features Conventional Parameters 6 Device Interface Include Device Management, Personnel，Photo Management, Record Query Deployment Mode Support Public Cloud Deployment And LAN Use IP Rating IP65 Dustproof & Waterproof In The Open Air Power Supply DC 12V Operating Temperature 0 ℃ ~5 0 ℃ Storage Temperature - 20 ℃ ~60℃ Power Consumption 10W (Max) Installation Fixed By Screws Through The Support Column Size Standard Model: 271.24*128*21.
Product Dimension 7
Installation 1. Under the installation plane, get the cable and cable interface successively through the gasket and nut, tighten the nut, connect the power supply and network cable, and start the screen; 2. Hold the column, turn it gently, adjust the brake angle to the right position, and tighten the nut.
Wire Interface Applications DC 12V Power Pack USB HOST Wegan Output USB OTG Wegan Input Relay 9 UBOOT Button Ethernet 232 Serial Port
Definition of the Terminal Interfaces Relay Electrical Definition of Wigan Input Terminal Electrical Definition of Terminal Pin1 COM Pin1 12V Pin2 NO Pin2 GND Pin3 WG-D1 Pin4 WG-D0 Electrical Definition of 232 Serial Electrical Definition of Terminal Port Terminal Pin1 WG-D1 Pin1 232_RX1 Pin2 WG-D0 Pin2 232_TX1 Pin3 GND Pin3 GND Wigan Output 10
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.
