User Manual

7
Basic Operation
Turn On and Off The Camera
Switch the Mode Button to “Test/On” to turn on the camera.
Switch the Mode Button to “Off” to turn off the camera.
System Setup
Switch Mode Button to “Test”, then you can set the system parameters.
1. Press Video/Photo button to switch between the two modes.
2. Press Menu button to open the setup menu.
3. Press Up/Down button to scan all menu. Then press OK button to
enter the options interface.
4. Press Up/Down button to scan all options. And press OK button to
confirm options.
5. Press Menu button again to turn back to last menu or exit the setup
menu.
Setup menu and functions are as below:
Mode
Set the working mode. In photo mode, the camera just takes pictures. In
Video mode, the camera just records video. In photo and video mode,
the camera will take a photo first, then start to record video.
Options: Photo/Video/Photo & Video.
Photo Resolution
Set the still image resolution.