User Manual

8
Timing Operation- Clock Synchronization
In the shutdown state, press and hold the clock knob to call out the clock icon, and
then turn the clock knob to the left (1 bar). When the“Time”icon starts to flash, press and
hold the clock knob , and when the hour digit flashes, you can turn the clock knob left
and right to adjust. After the adjustment, click the clock knob . When the the minute
and hour position flashes, turn the clock knob to adjust. After adjusting, wait for 5
seconds to complete the setting.
Timing Operation- Single-period Timing
In the shutdown state, press and hold the clock knob to call out the time setting. turn
the clock knob to the right, and the Number 1 to 24 would appear in sequence,
representing 24 time periods. Set the time at what time the heater is required to work.
For example: We need to set the heater to turn on at 7:00 in the morning. Turn the clock
knob to the right to adjust it to the number "7", click the clock knob . At this time a
solid yellow line will appear under the number "7" (as “7”). Five seconds later, the setting
is completed.