User Manual

6
Startup/Shutdown
1. Click the ON/OFF key in the shutdown state (Figure 4),the screen lights up, the
buzzer sounds once ( release the button ) and the heater is turned on. Then the screen
will display the working status of the main components one after another. The fan
works, the glow plug works, and the fuel pump starts to work 80 seconds later. When
the flame mark appears in the outline of the screen host, the ignition is successful, and
then it enters the preheating self-checking process.
2. In the standby state, press and hold the ON/OFF key for over 3 seconds, the screen
will display “OFF” (Figure 5), and the heater will enter the shutdown cooling process.
When the cooling is completed, the screen will turn off and the heater will stop running.
NOTE: Illegal power off is prohibited during the shutdown process.
(Figure 4)
(Figure 5)