Manual

==============================================================================

Specification for the Simple Brushless Gimbal Controller with GP-55 Gimbal (First Version):

Board: version 1.0+3a

Firmware: 2.2 b2

Tuning Software: SimpleBGC GUI 2.2b2

GP-55 included Licensed BaseCam SimpleBGC Controller

(Starting from version 2.1, firmware upgrade is possible from GUI.)

Alexmos websize dowlond 2.2b2

http://www.basecamelectronics.com/files/v10/SimpleBGC_GUI_2_2b2.zip

User manual: SimpleBGC_manual_2_2_eng.pdf

http://www.basecamelectronics.com/downloads/

NOTE: The expansion board needs extra power supply to operate. When you are tuning gimbal connected to

PC, It can't get power supply from FTDI or USB, and therefore may not be recognized by the main board.

Default Setting of GP-55: