Manual

5.1 Assembly Steps – Mounting onto DJI S800
Step 1.
Prepare the O-ring Damping System (For
DJI S800).
Step 2.
Prepare the DJI S800 H-Frame for
installation.
Step 3.
Insert the center rod of DJI S800 H-Frame
into the center 12mm Metal Mount. (Apply
little amount of Thread Locker to the screws
before installation.)
Step 4.
Loosen the 12mm Metal Mount on O-ring
Damping System.
Step 5.
Insert the side parts of DJI S800 H-Frame
into the four 12mm Metal Mounts onto the
O-ring Damping System.
Step 6.
Secure the DJI S800 H-Frame onto the 5pcs
12mm Metal Mounts using M2.5x16mm
Screws. (Apply little amount of Thread
Locker to the screws before installation.)
Page 11