Alware Landing Gear V2 for Multi Flyer Assembly Manual WWW.ALWARERC.
Check list All the package should be packed and contain all the items in as shown below. Please contact the vendor you purchased from if anything is missing at once. WWW.ALWARERC.
STEP1-1 Slide the Tee fitting into the thin tubing. WWW.ALWARERC.
STEP1-2 Put on screws 2pcs M2.5x10mm (Do not tighten yet). WWW.ALWARERC.
STEP2-1 Put on Carbon fiber Tube . WWW.ALWARERC.
STEP2-2 Tighten the screws WWW.ALWARERC.
Step3-1 Put on Cap Screw 2pcs M2.5 x 15mm & Cap Screw 2pcs M2.5 x 6mm WWW.ALWARERC.
Step3-2 Put on Cap Screw 4pcs M2.5 x 6mm WWW.ALWARERC.
Step3-2 Put on Carbon fiber Tube WWW.ALWARERC.
Step3-3 Tighten the Cap Screw 2pcs M2.5 x 15mm to secure the boom. WWW.ALWARERC.
Step3-4 Put on Alu Tube and tighten the Cap Screw 2pcs M2.5 x 15mm. WWW.ALWARERC.
Step 4-1 Put on the Landing Gear Tube Clamp With Cap Screw M2*8 WWW.ALWARERC.
Step4-2 Lock tube block in place with Button Head Cap Screw M2x5mm WWW.ALWARERC.
Step5 Sub assembly WWW.ALWARERC.
Fully assembled WWW.ALWARERC.
Connection with DJI F450/ 550 Adjust the distance of the Alu Tube/ Landing Gear Tube Clamp to fit F550 / F450 at Step3-4 and Step 4-1. WWW.ALWARERC.
WWW.ALWARERC.
