Product Manual

TOM Drafting Machine
Tools Required: Flat head screwdriver
Operating/In Use Instruction
Installation:
The TOM drafting machine is mounted on a drawing board and is
designed to maximize the space available by virtue of the sliding
movement of tracks (A) and (B), illustrated by the arrows.
Note: To move track (A), unscrew knobs (C) counterclockwise
(see Figure 1) and tighten them once in the chosen position.
Use of TOM on the Table:
The drawing board supplied allows for two angles of inclination:
Approx. 30° if the drawing board is mounted directly on a table
(see Figure 3a).
Approx. 60° if the drawing board is mounted with clearance from
the supporting surface of the table (see Figure 3b).
The maximum work surface available is illustrated in Figure 2:
25
1
∕
2
"w x 19
1
∕
4
"h
1
A
B
C
Figure 2
Figure 3b
Figure 1
Figure 3a
For model
no.TOM