Item Brochure
GENERAL
®
4" Pocket Slide Caliper
Stainless steel pocket slide caliper with a
5" rule, inside and outside reading in 16ths
and 32nds, and decimal equivalents on the
back. Individually carded.
No. V729
SRP $22.09 ea
GENERAL
®
3" Pocket Caliper
Precision-made, high-strength, berglass,
reinforced plastic caliper. Opens to 3"
outside measurement capacity. 4" rule is
graduated in 16ths on the back. Inside/
outside readings graduated in 32nds/mm.
No. G141ME
SRP $9.59 ea
GENERAL
®
6" Digital Fractional Caliper
6"/153mm, 3-mode display with decimal
inch, fraction inch, and metric readings.
Heavy-duty metal housing, convenient
on/off feature, and rugged stainless steel
construction. Reads in actual fractions, as
well as decimals.
No. G147
SRP $65.00 ea
GENERAL
®
6" Direct Reading Digital Caliper
Accurate digital measurements in both
inches and metric. Swiss precision
crafted with friction thumb roller. Four-way
measurement: outside, inside, depth, and
step. Right hand.
No. G143
SRP $134.50 ea
GENERAL
®
1" Micrometer
Features cutaway frame for tight
measurements, decimal equivalents, and
machine-cut black graduations reading
in 1/1000". Measurement range 0" to 1".
Instructions included.
No. MC102
SRP $31.00 ea
ALVIN
®
Double Readout Plan Measure
Ideal for blueprints, map scaling, and
drawing. Determines distances in miles or
kilometers on maps and plans according to
scales indicated on dial. Assures precision
measurement forward or backward and
follows curved lines. Precision metal gears
are reset by revolution counter. Convenient
handle for easy maneuverability. Two
large, easy-to-read dials with unbreakable
plastic faces. White dial graduated in
inches and centimeters (36" = 92cm).
Yellow dial graduated in 1/2", 1/4", 1/8", and
1/16" to the foot. Includes leather-like vinyl
pouch for protection.
No. 1121
SRP $44.75 ea
GENERAL
®
Serviceman’s
Precision Measuring Set
Four of the most useful measuring
and marking tools for mechanics and
machinists: 0-1" micrometer, 0-6"
thousandth reading caliper, 6" rigid
stainless steel rule in 8ths, 16ths, 32nds,
and 64ths, and a tungsten carbide scriber
with magnetic pickup.
No. GS004
SRP $167.00 st
GENERAL
®
6" Dial Caliper
Stainless steel construction for accuracy
and durability. Large, clear dial reads to
.001". Satin chrome scale with clearly
etched lengths of inch graduations.
Covered rack ensures smooth operation
by preventing dirt and chips from entering
rack and gear mechanism. Adjustable
bezel for zero setting. Right hand.
No. G107
SRP $61.00 ea
GENERAL
®
Metric and English
Vernier Caliper
Constructed of steel with inside and
outside jaws, a full length depth gauge,
lock for repetitive measurement, friction
roller adjustment, and slide lock for
gauging. Also features inside, outside
depth and step measurement. Graduated
in mm and 16ths of an inch with vernier
reading of .1mm and 1/128". 5" capacity.
No. V722
SRP $20.59 ea
GENERAL
®
6" Precision
Swiss Dial Caliper
Features non-magnetic, high-impact
lumalcore construction. Features
large, easy-to-read 1½" diameter dial
with .01" and 1/64" scales. Range: 6".
(Manufacturers No. G-142).
No. 80D
SRP $55.49 ea
ALVIN
®
Two-Face Map,
Plan or Curve Measure
Bright, nickel-plated nish with convenient
handle and clear, unbreakable plastic
lenses. For measuring distances on roads,
curves, contours, maps, patterns, and
drawings. Dial registers inches, half-inches,
and centimeters up to 39" and 99cm. Also
measures statute miles and nautical miles.
Multiply for feet, yards, or miles.
No. 1111
SRP $53.75 ea
ALVIN
®
Two-Face
Inch Counter
The same as No. 1118, but with easy
grip 1½" long xed handle. Packed in a
leatherette case.
No. 1117
SRP $70.50 ea
ALVIN
®
Two-Face Inch Counter
Includes ring for compact pocket use
and large diameter for easy readout.
One side is tted with a special dial for
exact measurement of straight lines and
curves on technical plans, drawings,
blueprints, etc. While the pointer indicates
traced distance in inches, the counter
disk registers it in feet. The second dial
measures distances on maps or plans
made to scales of 1/2", 1/4", and 1/8"
to a foot and counts the number of
full pointer revolutions.
No. 1118
SRP $62.50 ea
SCALEX
PlanWheel™ XLU2 Measure
Designed especially for contractors,
estimators, and surveyors. Handles
any and all prints. Select any of the 111
common built-in scales or key in up to
19,998 user-setable scales. Calculates
square and cubic dimensions for regular
areas and volumes. Counter and adder
buttons on probe tip count items or add
xed lengths while scaling. Create, store,
and retrieve two user-dened scale factors.
Protective case and computer interface kit
sold separately. Connects to any Windows
application with XLU2 interface kit, which
includes software, an instructional manual,
and USB cable.
No. Description SRP
SC00552 PlanWheel $84.95 ea
XLU2
SC02552 XLU2 64.95 ea
Interface kit
SC00100 Protective case 9.95 ea
RULING, MEASURING, CALCULATORS
68
Front
Back
For Scale
One Revolution
Measures
1/16" = 1' 576'
1/8" = 1' 288'
1/4" = 1' 144'
1/2" = 1' 72'
Inches 36"
Centimeters 1 Meter
SC02552