user manual
Table Of Contents
- Voice Gateways System Manual
- About This Manual
- Contents
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Using the Web Configuration Server
- 3.1 Introduction to the Web Configuration Server
- 3.2 Accessing the Web Configuration Server
- 3.3 Using the Web Configuration Server
- 3.4 Home Menu - Product Info Page
- 3.5 WAN Menu
- 3.6 VLAN Tagging Menu
- 3.7 Telephone Menu
- 3.8 BW Reservation - DRAP Configuration Page
- 3.9 System Menu
- 3.10 Upgrade Page
- 3.11 Restart Page
- 3.12 Logout Page
- 3.13 Parameters Summary
- Appendix A - Internal Class 5 Services
- Appendix B - Default Telephony Parameters
- Appendix C - New Features
- Glossary
66 Operation
Chapter 3 - Using the Web Configuration Server
Click on the Save SNMP Settings button before leaving the page to save the new
settings. The new settings will be applied after restarting the unit.
3.9.4 Service Access Configuration Page
The Service Access Configuration page enables to enable/disable access to
various services. Access from each of the ports (LAN or WAN) using HTTP and/or
SNMP can be either enabled or disabled. The default for all options is enabled
(checked).
Click on the
Save Service Access Settings button before leaving the page to save
the new settings. The new settings will be applied after restarting the unit.
Read Community The read community string, up to 20 printable characters, case
sensitive.
Default string is public.
Write Community The write community string, up to 20 printable characters, case
sensitive.
Default string is private
Figure 3-24: Service Access Configuration Page
Table 3-16: SNMP Configuration Page Parameters
Parameter Description