User`s guide

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series
4-21
User’s Guide
Figure 4-13. The Security Tab
The station in which the SA-PCR card is installed can use one of the following
authentication algorithms (as defined in the 802.11 standard).
• Open System – any station in the WLAN can associate with an AP and
receive and transmit data (null authentication).
• Shared Key – only stations using a shared key encryption identified by the AP
are allowed to associate with it. You can only select this option if the card was
ordered with the Privacy option or if you enabled the WEP feature during the
upgrade procedure (as described in Section 4.4.1). The option which was
ordered is displayed in a read only field at the top of the dialog box. To see
whether the WEP option was enabled during installation, select the Station
Status tab described in Section 4.5.1.
Values: Unknown Card is not inserted.
Implemented Shared Key authentication is enabled.
Not Implemented Shared Key authentication is disabled.
Only open system authentication is
available in this mode.