User`s guide

SA-PCR PRO.11 PC Card Installation, Setup, and Management
User’s Guide
4-20
BreezeNET PRO.11 Series
The Power Management tab includes the following parameters:
• Power Management Mode – Enable Power Save mode by clicking the
Powersave option; disable by clicking the Normal option (default).
• Listen Interval Settings –Specifies how often the station is to “wake up” in
order to transmit or receive data (unicast packets). This parameter enables
performance optimization on a per station basis. In contrast, the DTIM period
(that is set in the AP only) defines the time period for all stations in the cell to
“wake up” in order to receive broadcasts.
Note: If the Power Save mode is enabled on one of the WLAN's SA-PCR stations, you
must also enable the Power Save mode on the AP through the BreezeNET
monitor. Refer to Section 3.5.2 for further information.
4.5.6 Security Tab
The Security tab of the SA-PCR Configuration utility allows you to set the security
parameters of the station.