User`s guide
SA-PCR PRO.11 PC Card Installation, Setup, and Management
User’s Guide
4-16
BreezeNET PRO.11 Series
off) you may decide not to use the higher rates. Possible values are 1, 2, or 3
Mbps.
• Transmit Antenna – By default, the unit dynamically selects the antenna
where reception and transmission is optimal. If your model has an external
antenna and uses only a single antenna, set Transmit Antenna to transmit only
from that single antenna. Antenna number one is the antenna nearest the
yellow LED.
• Load Sharing – When installing a Wireless LAN network in a high-traffic
environment, you can increase the aggregate throughput by installing multiple
APs to create co-located cells. Enable Load Sharing to cause your stations to
equally divide their traffic between the available APs.
Note: Parameter changes take effect only after reset.
4.5.3 Station Control Tab
The Station Control tab of the SA-PCR Configuration utility allows you to return
the card to default configuration values, and export/import configuration files.
Figure 4-10. Station Control Tab