User`s guide

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series
4-11
User’s Guide
4.3.3 Initial Configuration
If your wireless network uses a non-default ESSID, enter the proper ESSID as
follows:
1. Start the SA-PCR Configuration utility as described in Section 4.5. From the
Windows Start menu, select Programs - BreezeCOM Utilities, and then
Configure.
2. Edit the ESSID parameter. Click the WLAN Parameters tab and enter the
ESSID that matches the AP unit.
3. Restart the computer.
4.4 Installing the SA-PCR Utilities
If a previous version of the SA-PCR utilities is installed, uninstall it before
reinstalling the new version (as described in Section 4.4.1).
⇒
To install the SA-PCR utilities:
1. Insert the BreezeCOM Utilities diskette.
2. From the Windows Start menu, select Run. Type
A:\setup
, and click OK.
3. When the notification dialog box appears; click Setup.
Figure 4-5. BreezeCOM SA-PCR Utilities Setup
4. In the BreezeCOM SA-PCR Utilities window, choose a location for the
installation, and click OK.