User`s guide

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series
4-1
User’s Guide
4. SA-PCR PRO.11 PC CARD INSTALLATION,
SETUP, AND MANAGEMENT
This chapter describes how to install the SA-PCR card and its associated firmware,
drivers and utilities. The SA-PCR Configuration and SA-PCR Site Survey utilities,
which are used to setup and manage the card, are also described in this chapter.
4.1 Packing List
The SA-PCR PRO.11 package should come with the following items:
• SA-PCR PRO.11 PC card.
• Drivers diskette
• Utilities diskette
• Installation and User’s Guide.
4.2 Before You Begin
Before installing, do the following:
• Verify that the AP you are going to use is an AP-10 PRO.11. The SA-PCR
PRO.11 will work with any AP that is compliant to the 802.11 standard.
It is advisable to turn on the AP before installing the SA-PCR, enabling you to
use the SA-PCR LEDs to check the status of the SA-PCR when installation is
complete refer to Section 4.3.2, for further information about the LEDs.
• When installing on Windows 95/98, verify that you have the Windows CD
with you, or that the Windows CAB files are installed on your local hard disk in
a directory whose name does not exceed 8 letters. When the CAB files are on
the disk, they are usually found in C:\Windows\Options\Cabs.
• When installing on Windows NT, verify that you have the Windows NT CD
with you, or that the Windows NT distribution files are installed on your local